You can click 'HOW TO BUY' in the top menu for more information.

You can choose between the reliable 4-stroke Honda GXH50 engine or the 1 kW brushless electric motor with the largest Li-ion battery capacity on the market.

Please refer to the user manual for steps to install the blade.

Their compact size and light weight make the cable laying machines easy to transport in a small vehicle. You can lower the pivoting handle to save space. Also, if you use the machine with the Honda engine (600MH), it is highly recommended to put the fuel tap in the OFF position. In both machines, you can also remove the cable guide, the sliding foot and the blade to allow good positioning and storage of your machine.

The cable laying machine is designed to accommodate most of the cable spools supplied by robot manufacturers, such as reel-mounted reels, reels wound without a reel, and even reels in loose form. Spools of up to 800 meters of cable can be installed on the adjustable bracket, which includes a variety of spacers and a shock absorber to ensure smooth running. The optional oversized reel bracket (PWMA-0014) can accommodate reels up to 400mm in diameter and 350mm in width. No matter what type of cable reels you use, there is a way to do it.

It is easy to transport the machine from one work area to another. Here are the steps:

1. Loosen the clamp lever handle;

2. Turn the handle to the vertical position;

3. Lift the stand;

4. Pull or push the machine towards the work area.

You can also read the user manual for more details.

The cable laying machine is equipped with an adjustable distance rod that can be installed at the front or rear of the machine. It aligns the machine to the correct distance from the edge, allowing the cable to be buried at a distance of 15 cm to 45 cm. It is easy to use:

1. Unscrew the wing nut;

2. Position the spacer bar at the desired distance, between 15 and 45 cm;

3. Screw in the wing nut.

NOTE: The 0cm measurement is located on the left side of the spacer block. This part of the block is aligned with the blade. You can also read the user manual for more details.

Click on the "Accessories and Parts" tab to see the list of compatible batteries and chargers.

Please refer to the Warranty Terms section.